ACChemicals.com Just another WordPress weblog 2016-10-17T20:18:49Z http://www.acchemicals.com/feed/atom/ WordPress Tom <![CDATA[ACC Marble Finish]]> http://mcconnons.com/acc/?p=157 2015-11-13T18:02:27Z 2015-10-19T07:24:26Z Marble Finish is an all weather, non-staining release agent for easy void free and smooth release of concrete. Marble Finish yields very high quality architectural concrete finishes. The release provides corrosion inhibition of steel forms, very high heat resistance with no powdery residues. Marble Finish is also shipped with no red label due to the slower evaporating solvent now used and is not classified a flammable liquid.

download Marble Finish

]]>
Paul <![CDATA[ACC Tuff Release]]> http://www.acchemicals.com/?p=417 2015-10-19T16:10:13Z 2015-10-17T21:09:38Z A  high viscosity (a thick flowable liquid)  release which ensures the highest quality architectural and structural surfaces. Will not stain the concrete or affect adhesion of waterproofing or other coatings.  Designed for use with the most intricate molds and forms; Especially with low or no draft applications and when using highly superplasticized (SCC) mixes. May be used on all types of formwork including plastic, rubber or Styrofoam.

download-Tuff-Release

]]>
Paul <![CDATA[ACC Ruff Release]]> http://www.acchemicals.com/?p=455 2015-11-13T18:01:47Z 2015-10-15T16:56:31Z Ruff Release is a unique thickened blue colored release agent primarily for low or no draft applications on rough, irregular or smooth surfaces. Ruff Release yields a smooth and easy release from all types of form surfaces.

Apply Ruff Release to the most intricate and difficult form surfaces where release stresses may pose problems or wherever release issues are anticipated. Ruff Release works well in all applications however and will not stain the surface on which it is used. Ruff Release may be used on all types of form surfaces including plastic, rubber or Styrofoam.

download-Ruff-Release

]]>
Paul <![CDATA[ACC High Performance Release]]> http://www.acchemicals.com/?p=939 2015-11-13T18:00:34Z 2015-10-13T20:07:16Z ACC High Performance Release is an all weather, non-staining release
agent for easy void free and smooth release of concrete. ACC HPR yields very high quality architectural
concrete finishes. The release provides corrosion inhibition of steel forms, very high heat resistance with no
powdery residues. When used in accordance with the directions below the finished concrete will have a
smooth, paintable surface. In the event over application occurs and creates residue on the concrete a rinsing
of the concrete surface with a good commercial detergent will remove any residual laitance. ACC High
Performance Release is a non-flammable petroleum liquid, which for shipping purposes has a red label.

download-HighPerfRelease

 

]]>
Paul <![CDATA[ACC Synthetic Stone Release 3]]> http://www.acchemicals.com/?p=766 2015-11-13T18:01:28Z 2015-10-11T13:13:25Z ACC Synthetic Stone Release 3 is a ready to use, non-toxic, waterbased
stable emulsion with excellent release and surface consolidation properties. It is formulated to
reduce surface imperfections in precast, prestressed and cast-in-place concrete. It works well on all types
of form surfaces as well as rubber, plastic or urethane form liners. Promotes easy form removal, provides a
water repellent, rain resistant and rust inhibiting film to the formwork. It is suitable for both indoor and
outdoor applications particularly where VOC emissions are limited in the workplace.

download-ACC-SSR3

]]>
Paul <![CDATA[ACC Precast Finish 2/11]]> http://www.acchemicals.com/?p=758 2015-11-13T18:00:24Z 2015-10-09T13:04:42Z ACC Precast Finish 2/11 is a ready to use, non-toxic, water-based stable
emulsion with excellent release and surface consolidation properties. It is formulated to reduce surface
imperfections in precast, prestressed and cast-in-place concrete. It works well on most types of form
surfaces as well as plastic or urethane form liners. Promotes easy form removal, provides a water repellent,
rain resistant and rust inhibiting film to the formwork. It is suitable for both indoor and outdoor
applications particularly where VOC emissions are limited in the workplace.

download-ACCPrecast Finish 211

]]>
Paul <![CDATA[ACC Release 2/12 Concentrate]]> http://www.acchemicals.com/?p=1006 2015-11-13T18:02:17Z 2015-10-07T18:16:28Z ACC Release 2/12 is a non-toxic, water-based stable emulsion in concentrate form with excellent release and surface consolidation properties. It is formulated to reduce surface imperfections in precast, prestressed concrete production and all in-situ cast (cast-in-place) applications due to the high solids and works extremely well as a ring release preventing dry mix pipe from adhering to the steel forming rings.

download ACC Release 212 Concentrate

]]>
Paul <![CDATA[Combined Architectural Exposed Aggregate Specification]]> http://www.acchemicals.com/?p=894 2015-11-13T18:00:12Z 2011-12-01T16:14:47Z 1.01 Summary
A. Section includes: Exposed Aggregate Concrete produced through the use of a chemical surface
retarder to expose the aggregate of a gap graded concrete mix
B. Related Sections: Refer to the following sections for related work
Section 02200: “Earthwork”
Section 03300: “Cast-In-Place Concrete“
Section 05500: “Metal Fabrications”
Section: 07900: “Joint Sealants…..you may download the complete guide.

download Combined Architectural Exposed Aggregate Specification

 

]]>
Paul <![CDATA[ACC Micro Finish Gel]]> http://www.acchemicals.com/?p=857 2016-10-17T19:59:48Z 2011-08-13T20:47:46Z Micro Finish Gel is a new way to acid etch concrete in a controlled acid etching gel.  It is formulated in gel form which helps to limit fumes, control uniformity and adherence to vertical surfaces.  Ideal for simulated limestone finishes, for field applications, patching including vertical surfaces and as a preparatory step prior to the application of coatings in the place of sandblasting or even light shot blasting. Will not interfere with waterproofing or other coatings to be subsequently applied to the etched surface.

download-Micro Finish Gel

 

]]>
Paul <![CDATA[Altus & Optimus – Vertical and Horizontal Construction Joint Applications]]> http://www.acchemicals.com/?p=848 2015-11-11T17:40:33Z 2011-07-13T20:21:49Z Generally, when specifying chemical retarders on cast-in-place concrete
applications there should be references to both the formwork specifications as well
as the use and proper application of the retarder specified along with the placing
and finishing operations in the concrete sections. This is particularly important if
the contractors producing each are not the same. In most cases we would generally
recommend generating a separate architectural concrete specification inclusive of
all the preparation work, concrete placement and appropriate finishing required to
complete the project correctly.  Click below for complete guide information.

download ACC Joint Profiler

download-ACC-Construction-Joint-Guidlines

]]>